INTERIOR SWITCHES
4-7
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Headlamp High Beam
To turn on the headlamp high
beam, push the lever towards
the instrument cluster with the
headlamp low beam on. The
headlamp high beam indicator
(
) in the instrument cluster
comes on when the headlamp
high beam is turned on.
Passing
Regardless of the position of the
light switch, if you hold the lever to-
ward the steering wheel, the head-
lights are on high beam during the
hold. The high beam indicator
also illuminates on the instrument
cluster during the hold.
Right Turn Signal Switch
Left Turn Signal Switch
FRONT FOG LIGHT SWITCH
To turn on the fog lights, turn this switch while the tail
lamps or headlamps are turned on.
Driving with high beam headlamps
disturbs the approaching vehicle’s
visibility for safe driving. Use the high
beam headlamp only during very dark
situations when it is very hard to see
the road.
WARNING
While the turn signal lamp is turned on, the turn signal
indicator in the instrument cluster blinks.
NOTE
REAR FOG LIGHT SWITCH*
To turn on the rear fog light, push the rear fog light switch while
the front fog light switch is turned on. To turn it off, push the
switch again. The rear fog lights are automatically turned off when
turning off the light switch or the front fog light switch. Therefore,
to turn on the rear fog lights, push the rear fog light switch again
after turning on the light switch and the front fog light switch.
DAYTIME RUNNING LIGHT (DRL):
DRL Regulation Region Only
For vehicles equipped with the DRL, the tail
lights automatically turn on when turning the
starter key from ACC to ON.
The headlights turn on as the engine starts.
With the headlights automatically ON, turn-
ing the light switch from off to on turns off the
headlights but keeps the tail lights on.
(Turning the light switch immediately deacti-
vates the DRL function.)
D146_04-Interior Switches.p65 2009-12-30, ¿ÀÀü 3:19Page 7 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
Need help?
General
