INSTRUMENT CLUSTER
5-9
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
IMMOBILIZER INDICATOR
This indicator comes on when the ig-
nition key is communicating with the
engine control unit (during engine
starting) for 0.5 seconds.
The time needed for communication
between the immobilizer key and
ECU can vary. When the time is very short, the immobilizer
indicator does not come on.
When the ignition switch is turned to
the “ON” position and the driver’s
seat belt is not fastened, the re-
minder light will come on and the
seat belt warning chime will sound
for 6 seconds. This reminding opera-
tion stops when the driver fastens the seat belt even during
its operation period.
This seat belt reminder for passenger’s seat operates in
the same manner with the driver’s.
SEAT BELT REMINDER
If this indicator blinks, it may indicate that there is something wrong
in the immobilizer system. Have the system checked by a
Ssangyong Dealer or Ssangyong Authorized Service Center.
CAUTION
This warning light comes on when
the SSPS system is defective. When
this warning light comes on, the
steering effort becomes heavy.
SSPS WARNING LIGHT
If this light comes on, have the SSPS system checked by Ssangyong
Dealer or Ssangyong Authorized Service Operation.
CAUTION
SSPS?*
In traditional constant power assist steering system, the
steerability gets lighter as vehicle speed rises, and this may
cause dangerous situation.
SSPS, by providing appropriate steerability to driver accord-
ing to the changes of vehicle speed, gives steering stability.
In other words, the steering wheel gets lighter by adjusting
steerability in stop or low speed and provides steering sta-
bility by adjusting steering wheel to become heavier in high
speed.
D146_05-Instrument Cluster.p65 2009-12-30, ¿ÀÀü 3:20Page 9 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
Need help?
General
