6-10
TRANSMISSION AND BRAKE SYSTEM
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
SHIFT LEVER LOCK RELEASE
Shift Lever Lock in “P” or “N” Position
To shift from “P”, the ignition switch must be turned to
ON and the brake pedal must be depressed.
If you cannot shift out of “P”, check the followings:
- The ignition key is in “ON”.
- The brake pedal is d epressed.
Prohibition of Gear Shift from “N” to “R”
While Driving
To maintain the vehicle stability and protect the drive train of
the vehicle, the gear shifting from “N” to “R” is not available
when the vehicle speed about 8 km/h.
If you cannot shift out of “P” with the ignition switch in
ON ,and the brake pedal depressed:
1. Apply the parking brake firmly and turn the ignition off.
2. Depress the brake pedal and push down the shift lock
release lever with a stick such as a pen. Then, shift the
lever to other position.
Shift Lock Function
This system locks the gear selector lever in the automatic
transmission according to the driving status and condi-
tions to prevent driver from making operational mistakes,
to protect the system, and to provide good driving stability.
If this happens, have your vehicle repaired by the nearest
Ssangyong dealer or Ssangyong Authorized Service Center as
soon as possible.
WARNING
Shift lever lock
release
D146_06-Transmission and Brake System.p65 2009-12-30, ¿ÀÀü 3:21Page 10 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
Need help?
General
