LAMP
14-14
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1. Remove the ignition key from the key cylinder.
2. Cover the tip of a flat blade screwdriver with a cloth and
insert the tip into a lamp cover slot. Then, pry off the cover.
3. Replace the bulb with a new one.
4. Install the cover.
1. Remove the ignition key from the key cylinder.
2. Open the glove box.
3. Open the cover as shown in the figure.
4. Replace the bulb with a new one.
5. Install in the reverse order of removal.
GLOVE BOX LAMP DOOR COURTESY LAMP
D146_14-Lamp.p65 2009-12-30, ¿ÀÀü 3:27Page 14 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
Need help?
General
