CONVENIENCE DEVICES
11-5
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
INSIDE REARVIEW MIRROR
The inside rearview mirror can be adjusted up, down or side ways
to obtain the best rear view.
MANUAL TYPE INSIDE REARVIEW MIRROR
Manual Day/Night Adjustment
You can manually adjust the rearview mirror by pushing or
pulling its adjusting lever to avoid blindness at night due to
other vehicles behind you.
ECM (ANTI-GLARE AUTO ADJUSTMENT FUNCTION)*
The reflection rate of the inside rearview mirror can be au-
tomatically adjusted by the light intensity from a vehicle be-
hind you by pressing the anti-glare auto adjustment switch.
While pressing the switch, its corresponding indicator
comes on. Pressing the switch once more turns off the in-
dicator and deactivates the function.
When you are not able to see the back of your vehicle at night,
adjust the rearview mirror by holding the mirror body and pushing
or pulling it to a desired angle so that you can secure a clear rear
view.
CAUTION
For your safety, adjust the mirror before driving off the vehicle.
WARNING
Under the following conditions, automatic anti-glare function may
not operate properly.
• When the rear vehicle’s headlamp is not beamed directly to the
inside rearview mirror’s sensor.
• When the rear window has a dark tinted glass.
• When the gear selector lever is in the R position, automatic anti-
glare function will be cancelled to obtain the best rearview.
• For your safety, never adjust the mirror while the vehicle is in motion.
CAUTION
• The electrolyte may come out when the mirror is broken. Do not
allow it to contact your skin or eyes. If you accidentally get it in
your eyes, flush with water and see your doctor.
• For your safety, adjust the mirror before driving off the vehicle.
WARNING
Indicator
Brightness
detecting
sensor
Anti-glare auto adjustment switch
D146_11-Convenience Devices.p65 2009-12-30, ¿ÀÀü 3:23Page 5 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
Need help?
General
