INTERIOR SWITCHES
4-25
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
4-WHEEL DRIVE SWITCH
Driving Mode Change
2H ⇔ 4H
• Automatic Transmission Equipped Vehicle
Stop the vehicle on a level ground and place the gear se-
lector lever into the “N” position. Turn the switch to the de-
sired position while depressing the brake pedal.
• Manual Transmission Equipped Vehicle
Stop the vehicle on a level ground and place the shift le-
ver into the “Neutral” position. Turn the switch to the de-
sired position while depressing the clutch pedal.
It is recommended to shift under a speed of 70 km while
the vehicle is being driven.
2H, 4H ⇔ 4L
Only for part time TC, not
available for 2-wheel drive
vehicle and all wheel drive
vehicle.
Select a proper driving
mode according to the road
conditions.
• Do not drive your vehicle
over 80 km/h in 4H mode.
NOTICE
• When shifting the driving mode to “4H”, this
indicator comes on.
• This indicator blinks during the mode change
from “4L” to “4H”. After completion of the mode
change to 4H, the indicator comes on.
• When shifting the driving mode to “4L”, this
indicator blinks until the shifting operation is
completed. After completion of the mode
change to 4L, the indicator comes on.
D146_04-Interior Switches.p65 2009-12-30, ¿ÀÀü 3:20Page 25 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
Need help?
General
