To Next Page

To Previous Page

VENTILATION, HEATING, AIR CONDITIONING AND AIR PURIFICATION SYSTEM

9-14

DEFOGGING AND DEFROSTING

Inside of the Windshield

1. Press the defroster switch.

2. Adjust the fan speed with the fan speed control.

3. To quickly remove the fog on the glass, set the fan speed

switch at a high speed position.

4. To prevent fog from forming on the glass, setting the air

source selection switch to the fresh air intake mode is

recommended.

Outside of the Windshield

1. Press the defroster switch.

2. Adjust the fan speed with the fan speed control.

3. To quickly remove the fog on the glass, set the switch to

a high speed position.

4. Set the temperature control switch to a hot position.

Automatic Air Conditioner

Manual Air Conditioner

• When it rains and is very humid, you may have fog on the wind-

shield and windows. The fog will block your view through all

windows and can create a dangerous situation. To prevent any

fog on the glass, setting the air source selection switch to the

fresh air intake mode is recommended.

WARNING

• When you press this defrost switch, the air conditioner turns on

automatically and the system selects the fresh air intake mode.

NOTE

• An extended air conditioner operation in the bi-level mode or

defrost mode may cause the outside glass to fog due to the

high temperature difference between the inside and the out-

side of the vehicle. In this case, change the air flow to the

fresh air intake mode and set the fan at a low speed.

• Especially in winter or summer, to avoid glass fogging, remove

any obstacles such as snow or leaves on the air inlets.

CAUTION

Defroster switch

D146_09-Ventilation, Heating, Air Conditioning and Air Purification System.p65 2009-12-30, ¿ÀÀü 3:23Page 14 Adobe PageMaker 6.5K/Win

SSANGYONG 2010 Kyron User Manual

Questions and Answers: