To Next Page

To Previous Page

INTERIOR SWITCHES

4-6

Battery Saver (Automatically turns off the lights)

• To avoid discharging the battery, if the tail lamps are on after the ignition key

is removed, a buzzer will sound to alert the driver when the driver’s door is

opened. The tail lamps will automatically turn off when the door is closed.(With

the light switch on, if the ignition key is removed and all doors are closed, the

tail lamps are off due to the battery saver function. However, if you open a door

and turn the light switch to the “OFF” position and then to the “ON” position,

the tail lamps will stay on after the door is closed.)

• To turn the tail lamps on again, insert the ignition key into the ignition switch.

Or, turn the light switch to the “OFF” position and then to the “ON” position.

LIGHT SWITCH

Head- and tail lamps automatically

turn on or off based upon the intensity

of the sunlight analyzed by the auto-

matic light sensor.

(Headlamps ON)

(Tail lamps ON)

All lights are off.

(Automatic light ON)

OFF

AUTO

Side-marker, tail, license plate, fog, and

instrument cluster lamps come on.

Head-, side-marker, tail, license plate, fog,

and instrument cluster lamps come on.

(Lights OFF)

With the low beam switched on, ad-

just the aiming angle of headlights to

suit the vehicle load.

• To lower the aiming angle, rotate the

switch counter-clockwise.

• To raise the aiming angle, rotate the

switch clockwise.

HEADLIGHT LEVELING

SWITCH*

According to load condition, adjust the

aiming angle of headlights.

NOTE

D146_04-Interior Switches.p65 2009-12-30, ¿ÀÀü 3:19Page 6 Adobe PageMaker 6.5K/Win

SSANGYONG 2010 Kyron User Manual

Questions and Answers: