IN CASE OF EMERGENCY
12-17
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
SHIFT LEVER LOCK RELEASE AND SAFETY MODE RESET
How to Reset the Safety Mode
1. Park the vehicle and place the selector lever to the “P”
position.
2. Stop the engine and wait for over 10 seconds.
3. Start the engine.
Symptoms after Resetting of the Safety Mode
1. Apply the parking brake firmly and turn the ignition off.
2. Depress the brake pedal and push down the shift lock
release lever with a stick such as a pen. Then, shift the
lever to other position.
3. Start the engine, release the parking brake, and place the
selector lever to the
“D” position.
• Heavy shock when moving the selector lever
• Decreased driving force while driving at a high speed
• Fixed gear position during driving
• If the safety mode is activated, the shift indicator dis-
plays “D”.
If one of these symptoms happens, reset the automatic
transmission safe mode.
If abnormal operation of the transmission (fixed at the 2nd (4th)
forward gear in the “D” position or the 2nd (1st) reverse gear in
the “R” position)still exists, have the system check by a
Ssangyong Dealer or Ssangyong Authorized Service Center.
WARNING
HOW TO RELEASE THE SHIFT LEVER LOCK
• If the automatic gear selector does not move out of “P”, take the
steps mentioned above and take the vehicle to a Ssangyong
dealer or authorized service center. Have the vehicle checked
and repaired.
• The brake pedal must be depressed when you try to move the
selector.
WARNING
D146_12-In Case of Emergency.p65 2009-12-30, ¿ÀÀü 3:26Page 17 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
Need help?
General
