INTERIOR SWITCHES
4-16
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
ESP
OFF
(ELECTRONIC STABILITY PROGRAM) SWITCH AND ESP SYSTEM*
Blinking: When ESP is activated.
On: When ESP is deactivated (by pressing the ESP
OFF
switch).
When ESP system is defective.
When ESP is activated, the indicator light is blinking and
a warning buzzer sounds. If this indicator illuminates in
spite of an activated ESP, this means a malfunction of
the ESP system.
Stopping ESP Function With ESP
OFF
Switch
If the driving wheels are slipping on snowy or icy roads,
the engine rpm may not increase even when you depress
the accelerator pedal, and accordingly, you may not be
able to move your vehicle. In this case, stop the ESP
function by pressing the ESP
OFF
switch. When the ESP
OFF
switch is pressed, the ESP function stops and the vehicle
is driven independently from the sensor outputs.
Resuming ESP Function With ESP
OFF
Switch
If you push the ESP
OFF
switch again when the ESP function
is deactivated (the ESP warning lamp is turned on), the sys-
tem will be resumed and the ESP warning lamp on the in-
strument cluster goes out by resuming the ESP system.
ESP Warning Lamp
ESP
OFF
Switch
If you press the ESP
OFF
switch,
the ESP function stops and
the indicator lamp in the in-
strument cluster comes on.
Press this switch again to re-
sume the ESP function. At this
time, the indicator lamp goes
out.
D146_04-Interior Switches.p65 2009-12-30, ¿ÀÀü 3:20Page 16 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
Need help?
General
