SERVICE AND MAINTENANCE
13-33
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
WIPER BLADE REPLACEMENT
1. Lift the wiper arm up from the
windshield.
3. Slide the blade down and remove
it from the arm.
4. Install a new blade.
5. Put the wiper arm down.
2. Press the safety button ( ).
• Do not open the hood when the wiper arm is lifted up. The wiper and hood may be damaged.
• Do not operate the wiper when the washer fluid reservoir is empty.
• Be certain not to apply any fluid polish containing oil to the windshield of your vehicle
since this will result in streaks which impair vision. Contamination of either the window or
the wiper blades with foreign materials can reduce the effectiveness of the windshield
wipers. Never clean up the windshield with a waxed or oil-saturated cloth.
CAUTION
• Malfunctioning wipers on a raining or snowing day may be detrimental to your driving
safety. Never drive your vehicle with malfunctioning wipers on a raining or snowing day.
• Do not touch the running wipers. It may cause a personal injury.
WARNING
• The tailgate wiper blade can be re-
placed in the same manner.
NOTE
D146_13-Service and Maintenance.p65 2009-12-30, ¿ÀÀü 3:27Page 33 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
Need help?
General
