EasyManuals Logo

SSANGYONG 2010 Kyron User Manual

SSANGYONG 2010 Kyron
312 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #247 background imageLoading...
Page #247 background image
SERVICE AND MAINTENANCE
13-12
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Replenishment
Use only the 50/50 mixture of soft water and antifreeze as
specified.
1. Open the coolant surge tank cap slowly when the engine
is cold. At this time, you can hear a “hissing” sound.
2. When there is no more “hissing” sound, remove the cap
form the surge tank.
3. Add the 50:50 mixture of water and antifreeze to the cool-
ant reservoir tank.
4. If no unusual things happen, tighten the coolant reser-
voir cap.
When the coolant level is too low, the engine can overheat. If the
coolant temperature gauge in the instrument cluster goes up
abnormally, immediately check the coolant level. Use only the
Ssangyong genuine coolant and anti-freeze. If different types of
coolants or unapproved coolants are used to refill, chemical reac-
tions can be caused and block the flow of the coolant. This may
cause the engine to overheat or burning inside the engine.
WARNING
Scalding hot coolant and steam could be blown out under
pressure, which could cause serious injury. Never remove the
coolant surge tank cap when the engine and radiator are hot.
Use only the SSangyoug genuine coolant and anti-freeze.
WARNING
Avoid any direct contact of the coolant to the painted body of
the vehicle.
CAUTION
D146_13-Service and Maintenance.p65 2009-12-30, ¿ÀÀü 3:26Page 12 Adobe PageMaker 6.5K/Win

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SSANGYONG 2010 Kyron and is the answer not in the manual?

SSANGYONG 2010 Kyron Specifications

General IconGeneral
BrandSSANGYONG
Model2010 Kyron
CategoryAutomobile
LanguageEnglish

Related product manuals