TS 410, TS 420
English
37
All accessible screws, nuts and bolts (not
adjusting screws)
Tighten XX
Antivibration elements
Inspect XXX
Have them replaced by a servicing
dealer
1)
X
Abrasive cutting wheel
Inspect XX
Replace XX
Supports/rubber buffers (underneath the
machine)
Inspect X
Replace XX
Safety information label Replace X
1)
STIHL recommends the STIHL servicing dealer
The information applies in normal operating conditions. The specified intervals
must be shortened accordingly when working for longer than normal or under dif
-
ficult cutting conditions (extensive dust, etc.).
Before starting work
At the end of work and/or
daily
Whenever tank is refilled
Weekly
Monthly
Yearly
If faulty
If damaged
As required
To Next Page
Loading...
