TS 410, TS 420
English
15
Types:
– for dry applications
– for wet applications
The proper selection and use of
composite resin cutting wheels ensures
economical use and avoids accelerated
wear. The product code which appears
– on the label and
– on the packaging (table with
recommendations for use) is an aid
to selection
STIHL composite resin cutting wheels
are suitable, depending on the version,
for cutting the following materials:
– Asphalt
– Concrete
– Stone
– Ductile cast iron pipes
– Steel; STIHL composite resin
cutting wheels are not suitable for
cutting railway tracks
Do not cut any other materials – risk of
accident!
For wet applications.
The proper selection and use of
diamond abrasive wheels ensures
economical use and avoids accelerated
wear. The product code which appears
– on the label and
– on the packaging (table with
recommendations for use) is an aid
to selection
STIHL diamond abrasive wheels are
suitable, depending on the version, for
cutting the following materials:
– Asphalt
– Concrete
– Stone (hard stone)
– Abrasive concrete
– Fresh concrete
– Clay brick
– Clay pipe
– Ductile cast iron pipe
Do not cut any other materials – Risk of
accident!
Never use diamond abrasive wheels
with side plating as they jam in the cut
and can result in extreme kickback –
Risk of accident!
Product Codes
The product code is a combination of
letters and numbers, consisting of up to
four characters:
– the letters denote the main field of
application of the abrasive wheel
– the numbers denote the
performance class of the STIHL
diamond abrasive wheel
Axial and radial run-out
A faultless spindle bearing of the cut-off
machine is necessary for a long service
life and efficient functioning of the
diamond abrasive wheel.
Using the abrasive wheel on a cut-off
machine with a faulty spindle bearing
can lead to deviations in radial and axial
run-out.
Composite Abrasive Wheels Diamond Abrasive Wheels
To Next Page
Loading...
