STS 1656 - Remote Interface Options

1656 & 1657 Battery Element Tester Owner’s Manual
STS Instruments Page 11 of 88
Parameter Specification Notes
Input Fuse
Type
250V, 0.5A, Slow Blow
Dimension
5 x 20 mm / 0.20” x 0.80”
On/Off Switch
Type
Rocker Type, Front Panel. Press O to turn Off
Line Cord
Type
IEC 60329, C13, Detachable
AC Input Connector
Type IEC 60320, C14
2.4 Remote Interface Options
Parameter Specification Notes
USB
USB Rev.
2.0
Virtual COM Baud Rate
115200
Connector Device, Type B, Rear Panel, Female
UBS Connector Pins
Pin 1
+5Vdc
Pin 2
TxD
Pin 3
RxD
Pin4
Signal Gnd
RS232 (Option –RS232) – NOTE: Mutually exclusive with –RS485 option
Baud Rate
115200
Data Bits
8
Start Bits
1
Stop Bits
1, 2
Connector D-Sub, 9 pin, Rear Panel, Female
RS232 Connector Pins
Pin 1
Signal Gnd
Pin 2
Vcc
Pin 3
TxD
Pin4
RxD
Pins 5, 6
Con
Pins 7, 8, 9
n/c