STS 1656 - Table 7-2: Type 070 Adapter Module Specifications; Table 7-3: Type 070 Adapter Terminal Strip Positons; Technical Specifications

1656 & 1657 Battery Element Tester Owner’s Manual
STS Instruments Page 48 of 88
7.1.7 Technical Specifications
PARAMETER
SPECIFICATION
REMOTE I/O CONTROLS
Test Input
115Vac applied will initiate and maintain test voltage
Reject Output
115VAC Line Derived
AC INPUT
Input Voltage
115V ± 10 % variation; 47 – 63 Hz
CONNECTION
Terminal Strip, Pin 1 (Line) and Pin 2 (Neutral)
TESTER REQUIREMENTS
TT1652 Option
The use of this adapter requires the TT1652 Option
on the 1656 or 1657 Battery Element Tester. This is a
factory configured option. See section
6.1 for details.
Table 7-2: Type 070 Adapter Module Specifications
TERMINAL STRIP POSITION
SIGNAL
PIN 1
AC Line Input (Line)
PIN 2
AC Line Input (Neutral)
PIN 3
Ground
PIN 4
AC Test Input (High)
PIN 5
AC Reject Output (High)
PIN 6
No Connection
Table 7-3: Type 070 Adapter Terminal Strip Positons