1656 & 1657 Battery Element Tester Owners’ Manual
STS Instruments Page 84 of 88
13 CE MARK Declaration of Conformity
The manufacturer hereby declares that the product
Product Name: STS Models 1656 and 1657
Description: BATTERY ELEMENT TESTER
Conforms to the following stands or other normative documents:
RoHS (DIRECTIVE 2011/65/EU)
Standard applied EN 50581: 2012
SAFETY:
Standard applied EN 61010-1:2010
EMC:
Standard applied EN 61326-1:2013
ELECTROMAGNETIC EMISSIONS:
Radiated Emissions (at Enclosure)
CISPR 11 Group 1 CLASS A **
Conducted Emissions (at Mains Terminals)
CISPR 11 Group 1 CLASS A **
** GROUP 1: designates General Purpose
Applications for this device. CLASS A:
designates the device is not suitable for
installation in a domestic building.
Voltage Fluctuations and Flicker IEC 61000-3-3:2008 (Section 5)
ELECTROMAGNETIC IMMUNITY:
Electrostatic Discharge (Enclosure Port) IEC 61000-4-2:2008
RF Electromagnetic Field (Enclosure Port) IEC 61000-4-3:2006+A1:2007+A2:2010
Electrical Fast Transient/Burst (Input AC Power port; Signal port) IEC 61000-4-4:2004+A1:2010
Surge (Input AC Power port) IEC 61000-4-5:2005
Conducted Disturbances (Input AC Power port; Signal port) IEC61000-4-6:2008
Voltage Dips and Short Interruptions (Input AC Power port) IEC 61000-4-11:2004
Power frequency magnetic fields (Enclosure Port) IEC 61000-4-8:2009
Supplemental Information:
When and Where Issued: August 11, 2014
Shanghai, China
Authorized Signatory Jerome Wang
Quality Assurance Inspector
PPST Shanghai, Co, Ltd.
Mark of Compliance:
Responsible Person Michael Yu
PPST Shanghai, Co, Ltd.
4 floors , building 2, No. 2185 Lai Fang Road
Jiu Ting Town, Song Jiang District,
Shanghai, 201615, China
To Next Page
Loading...
