STS 1656 - STATUS Commands

1656 & 1657 Battery Element Tester Owner’s Manual
STS Instruments Page 58 of 88
8.4.5 STATUS Commands
Status commands control and return settings for status and error reporting.
STATus:OPERation:CONDition?
Command Syntax: STATus:OPERation:CONDition?
Purpose: Returns the content of the Status Operation Condition register.
Description: This command returns the bit values of the Status Operation Condition
register. This is a query only format command.
Query Format: STATus:OPERation:CONDition?
Returns: <NR1>
STATus:QUEStionable:CONDition?
Command Syntax: STATus:QUEStionable:CONDition?
Purpose: Returns the content of the Questionable Status Condition register.
Description: This command returns the bit values of the Questionable Status
Condition register. This is a query only format command.
Query Format: STATus: QUEStionable:CONDition?
Returns: <NR1>
STATus:OPERation:ENABle <n>
Command Syntax: STATus:OPERation:ENABle <n>
Purpose: Sets the content of the Status Operation Enable register.
Description: This command sets the bit values of the Status Operation Enable
register.
Parameter: 0 - 255
Query Format: STATus:OPERation:ENABle?
Returns: <NR1>