STS 1656 - Page 63

1656 & 1657 Battery Element Tester Owner’s Manual
STS Instruments Page 63 of 88
SYSTem:TIME
Command Syntax: SYSTem:TIME
<space><hh>, <mm>, <ss>
Purpose: Sets the Real Time clock’s time to the value passed. Time format is
hours, minutes, seconds (HH,MM,SS). All fields are NR1 (integer)
Description: Numeric values representing Hours (00-23), Minutes (00-59), Seconds
(0-60). Note: 60 is accepted for seconds to allow for rounding on non-
integer values. Any rounded value resulting in 60 shall be set to 0.
Query Format: SYSTem:TIME?
Returns: <hh>, <mm>, <ss>. All fields separated by commas.