Micro Series
1-8 Micro Series
Document generated: 29.06.17
SW V1.1
1.3 Main Features
The Studer Micro Series mixer is fully loaded with mixer functionality :
•12DSPchannelswithHPF, EQ, De-Esser,Compressor,NoiseGateand
Automatic Gain Control
•1xStereoProgramBuswithBrickwallLimiter
•1xStereoRecordBuswithBrickwallLimiter
•4xStereoSendBus(AuxorN-1)withBrickwallLimiter
•1xStereoPFLBus
•Input-andoutputrouting
•Internaltestsignalgenerator
•OffAirRecording
•MainLevelMeters
•TrackPlayerwithPlaylist
•JinglePlayer
•MonitoringwithDJ-andGuestHeadphoneoutputs
•Talkback
•TimeandWatch
•ConfigurableGPIOsforfaderstart,etc.
•UserSnapshots
•UserAccessPrivileges
1.4 How can it be operated
The Micro Core has an integrated webserver, which allows any computer that
is able to run HTML5 pages on its webbrowser to control the Micro Core.
There is no need to install any drivers or applications. The only requirement
is a network connection to the Micro Core - this can either be via wireless
LAN or via a wired LAN connection to the Micro Core’s Ethernet port.
Once the webbrowser has been directed to the Micro Core’s IP address, the
control screen is loaded and control elements which are optimized for touch-
screens with multitouch-operation allow to control the mixer.
Note : For browser control of the Micro Core, cookies must be enabled.
1.4.1 GUI
The entire functionality of the Micro Series can be controlled from the GUI
(Graphical User Interface) running on a webbrowser, as described above, or
through local connected screen, keyboard and mouse.
Note : GUI on iPad Please don’t use Mozilla Firefox or Chrome browsers on the iPad, as they
both don’t support full screen mode.
Use the Safari browser instead, and create a Home Screen Icon, which opens
the browser in full screen mode.
1.4.2 Micro Fader
In addition to the GUI, one or two hardware Micro Fader modules can be
connected to the Micro Core. This provides hardware faders and buttons for
those operators who wish full tactile control of the Micro Series mixer.