Studer Micro Series User Manual

Micro Series
1-16 Micro Series
Document generated: 29.06.17
SW V1.1
2.1.3 Chan View
The channel view shows the faderstrips of the mixers input channels. All
twelve input channels are shown - by using the scroll buttons in the central
section the operator can navigate to the desired faderstrips. Also swiping can
be used on a touchscreen to navigate between the faderstrips.
The operating elements that are common to all channels are these (channel role “Default”) :
[1]
[2]
[3]
[4]
[5]
[6]
[1] Label The channel label display shows the channels name. This name can be entered
in the Options page of the channel. The labels background changes from grey
to blue, when the channel is ‚On-Master‘.
[2] Rec button The Rec button assigns a channel to the record bus.
[3] OVL Indicator The overload indicator is used to indicate analogue input clipping (A/D con-
verter), which means overload is never illuminated for digital sources. For

Studer Micro Series Specifications

General

Brand	Studer
Model	Micro Series
Category	Mixer
Language	English