Micro Series
1-28 Micro Series
Document generated: 29.06.17
SW V1.1
2.1.9 Right Section
The right section of the main page hosts control elements for Watch, Record-
ing, Snapshot handling, Metering and Monitoring.
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[10]
[11]
[14]
[8]
[9]
[13]
[12]
[1] OnAir Watch The OnAir watch gives a permanent display of the current time and date. It
can be NTP synchronized.
[2] Fader Stopwatch The Fader stopwatch measures the channel-open time of the most recently
opened channel that is “On-Master”. Only channels of the role “DJ”, “Guest”
and “Input for Send” start the stopwatch.
When clicking or touching onto the display of the stopwatch, a countdown
time for the most recently opened channel can be entered. As soon as the time
reaches 00:00:00, the channel name will flash for five seconds. If the time
00:00:00 is entered as a countdown time, the stopwatch will count upwards
for as long as the channel is opened.
The display of the stopwatch also indicates the name of the currently mea-
sured channel. When in countdown mode, the countdown icon in the top right
corner of the display is shown.
[3] Recorder As a default, the REC bus is feeding the USB Recorder. So all channels that
are assigned to the REC bus are recorded as soon as a valid memory stick is
inserted and the record button is pressed. Details see chapter 2.1.9.1.
[4] User Snapshots The User Snapshot considers the fact that the Micro Series are designed as
To Next Page
Loading...
Need help?
General
