Micro Series
1-24 Micro Series
Document generated: 29.06.17
SW V1.1
current playing file has come to its end. If the operator decides, that a different
file should be played as next file, she/he can long-click/touch on any other
file in the playlist, whereupon the long-clicked file will be marked with the
blue frame and becomes the next file to be played.
The next file to be played from the playlist is defined as follows :
•Afterselectinganewplaylist,thefirstlistitemisthenextfiletobeplayed.
•Eachtime,afilefromtheplayliststartsplayback,thesubsequentfilein
the playlist is automatically selected as the next file to be played. After
the last file from the playlist starts playback, the first file in the playlist is
automatically selected as the next file to be played.
2.1.6.2 Jingle Player Operation
The Jingle Player supplies stereo audio playback through the inputs USB 1/2.
Any channel that is configured to have these inputs as source is in the role
“Jingle Player” and is used to control the playback of the jingles.
Nine different jingle can be loaded which will then be available for playback
through nine direct access buttons.
Audio files can be assigned to jingle buttons through the following file name
conventions:
Jingle Player files must be located in the ‘Jingle’ folder of the USB storage
media.
The filename begins with the character “J” followed by a one- or two digits
button number 1..9 or 01...09.
The first eight characters of the filename are indicated on the jingle button.
If the filename is more than eight characters long, the surplus characters are
omitted.
The following audio file formats can be used for the Jingle Player :
Format File Extension Description
Wave .wav uncompressed audio
AAC .aac lossy audio compression
MP3 .mp3 lossy audio compression
Ogg Vorbis .ogg lossy audio compression
AIFF .aif uncompressed audio
FLAC .flac lossless audio compression
Example : J01_Logo 1.wav is the file that will be played when button 1 is pressed. The
button will be labeled “Logo 1”.
J2Applaus.wav is the file that will be played when button 2 is pressed. This
button will get the label “Applaus”.
The Jingle Player is controlled on Operation Level L1 of the Jingle Player
Channel through the following elements :
•Jinglebuttonsinthechannelstartplayback.
•ChannelON/OFFbuttonofthechanneltostopplayback
•JinglebuttonsinthePLAYViewpagetostartplayback
•STOPbuttoninthePLAYViewpagetostopplayback
Only one jingle can be played at the time. Starting another jingle stops the
currently playing jingle and starts the next one.
To Next Page
Loading...
Need help?
General
