Micro Series
1-76 Micro Series
Document generated: 29.06.17
SW V1.1
Paired to this Core - disconnected
Paired to this Core - connected, but
different Cloud ID
Not paired
[11] Version The column indicates the Micro Fader module firmware version for each
Micro Fader module available on the network.
[12] Disconnect All This button disconnects all paired Micro Fader modules, which are currently
available on the network.
[13] Channel Selection ComboBox It is used to pair or un-pair a Micro Fader module.
[14] Locate the LOCATE function is activated on the corresponding Micro Fader module
- the Micro Fader module will flash for five seconds.
[15] Firmware update It allows updating the firmware on each Micro Fader module which is paired
to the Micro Core.
To Next Page
Loading...
