4-4
Heater programs
The heater programs are optimized for Sumitomo protection sleeves. Select an appropriate heater
program for the protection sleeve you use.
Cate
or
Heater pro
ram Details
Recent
－
The heater program selected recently is listed.
60mm
60mm 0.25
Can be used for heat shrinking 60mm protection sleeves for single
fiber with 0.25mm coatin
, for example, Sumitomo FPS-1.
60mm 0.9
Can be used for heat shrinking 60mm protection sleeves for single
fiber with 0.9mm coatin
, for example, Sumitomo FPS-1.
40mm
40mm 0.25
Can be used for heat shrinking 40mm protection sleeves for single
fiber with 0.25mm coatin
, for example, Sumitomo FPS-40.
40mm 0.9
Can be used for heat shrinking 40mm protection sleeves for single
fiber with 0.9mm coatin
, for example, Sumitomo FPS-40.
Drop
60mm Drop
Can be used for heat shrinking 60mm protection sleeves for drop
cable splice, for example, Sumitomo FPS-D60.
40mm Drop
Can be used for heat shrinking 40mm protection sleeves for drop
cable splice.
Slim 60mm S60mm 0.25
Can be used for heat shrinking 60mm semi-shrunk protection
sleeves for sin
le fiber, for example, FPS-61-2.6.
Slim 40mm S40mm 0.25
Can be used for heat shrinking 40mm semi-shrunk protection
sleeves for sin
le fiber, for example, FPS-40-2.6.
Lynx
LYNX
Can be used for heat shrinking protection sleeves for 10mm cleaved
Sumitomo’s splice-on-connector “L
nx-CustomFit™”.
E-SC Fusion
Can be used for heat shrinking protection sleeves dedicated for
Sumitomo E-SC Fusion Connector.
SPS
25mm 0.9
Can be used for heat shrinking 25mm protection sleeves of Nano
Sleeves N9 series, for example, Sumitomo FPS-N9-25.
20mm 0.9
Can be used for heat shrinking 20mm protection sleeves of Nano
Sleeves N9 series, for example, Sumitomo FPS-N9-20.
To Next Page
Loading...
