6-11
Functions Details
ECO Mode Saves power consumption by adjusting monitor brightness and
heat shrink oven temperature.
Sleep(Battery) If the splicer is not interrupted on battery operation for a certain
period of time, to minimize power consumption, it will go into
Sleep mode and the monitor will be turned off. Press any keys
except the power key to re-start the splicer.
Auto Power Off(Battery) If the splicer is in Sleep mode and not interrupted on battery op-
eration for another certain period of time, it will automatically
switch off. Switch it back on again.
Sleep(AC) If the splicer is not interrupted on AC operation for a certain pe-
riod of time, to minimize power consumption, it will go into Sleep
mode and the monitor will be turned off. Press any keys except
the power key to re-start the splicer.
Auto Power Off(AC) If the splicer is in Sleep mode and not interrupted on AC opera-
tion for another certain period of time, it will automatically switch
off. Switch it back on again.
Date(yyyy/mm/dd hh:mm) Sets the built-in clock to a local time.
Language Display language can be selected.
Temperature Unit This function switches the temperature units.
Buzzer (Key) A buzzer sound for key pressing is enabled / disabled.
Buzzer (Stop) A buzzer sound for arc pause is enabled / disabled.
Buzzer (Error) A buzzer sound for an error detected during the splicing process
is enabled / disabled.
Light for V-groove Sets the V-groove illumination to ON or OFF.
Opening Title1 Allows to create a text to be displayed on a splicer startup
screen. Max number of characters: 21
Opening Title2
Quick Start Reduces the time taken from power up to display of the initial
screen.
<Function settings> (Administrator mode)
To Next Page
Loading...
