Sun Microsystems StorEdge 3000 Series - Page 326

Index-4 Sun StorEdge 3000 Family Installation, Operation, and Service Manual • May 2004
L
layout map, 2-5
LEDs
drives, 7-2
front panel, 7-2, 7-3
rear panel, 7-4
limitations
controller, 5-2
high capacity configuration, 4-25
host channels, 4-14
local spare assignment, 6-25
logical drive
128-LUN limit, 6-14
assign local spare, 6-25
assign RAID level, 6-24
change assignment, 6-28
creating, 6-21, 6-23
defaults, 6-14
ID, 8-7
larger than 253 Gbyte, 6-17
LG number, 8-7
maximum number of disks per logical drive
Sun StorEdge 3510 FC Array, 6-13
maximum physical capacity, 6-25
maximum physical drive capacity, 6-25
maximum usable capacity per logical drive, 6-
13, 6-14
minimum requirements, 6-16
RAID level, 8-7
RAID level selected, 6-23
RAID levels defined, 6-15
size, 8-7
status, 8-6
status table, 8-6
logical drive preferences, 6-25
logical drives
deleting, 6-19
rebuilding, 9-3
logical volume, 6-16
loop id
setting on expansion units, 4-26, B-6
LUN
described, 6-35
M
management tools
accessing, 5-5
manual rebuild, 9-6
map
layout, 2-5
maximum drive capacity, 6-25
maximum number of disks
Sun StorEdge 3510 FC array, 6-13
Sun StorEdge 3511 FC array, 6-13
MISSING drive status, 8-9
Mounting Your FC Array, 3-5
muting
alarms, 8-4
beeper, 8-4
N
name (controller), 6-30
NEW DRV drive status, 8-9
null modem cable, 4-19
null modem serial cable, 4-19
number of host IDs supported
loop mode, 6-8
point-to-point mode, 6-8
NVRAM
restoring, 8-20
O
operating environments supported, 1-8
optimization
random I/O
maximum size, 6-12
sequential I/O
maximum size, 6-12
out-of-band
connection, 5-5
out-of-band connections, 5-5
out-of-band management, 4-21