Contents ix
9. Troubleshooting Your Array 9–1
9.1 RAID LUNs Not Visible to the Host 9–2
9.2 Controller Failover 9–2
9.3 Rebuilding Logical Drives 9–3
9.3.1 Automatic Logical Drive Rebuild 9–3
9.3.2 Manual Rebuild 9–6
9.3.3 Concurrent Rebuild in RAID 1+0 9–7
9.4 Identifying a Failed Drive for Replacement 9–8
9.4.1 Flash Selected Drive 9–9
9.4.2 Flash All SCSI Drives 9–10
9.4.3 Flash All But Selected Drive 9–11
9.5 Recovering From Fatal Drive Failure 9–11
9.6 Using the Reset Push Button 9–13
9.7 Silencing Audible Alarms 9–13
9.8 Modifying Drive-Side SCSI Parameters 9–13
9.9 Troubleshooting Flowcharts 9–14
9.9.1 Power Supply and Fan Module 9–14
9.9.2 Drive LEDs 9–17
9.9.3 Front Panel LEDs 9–19
9.9.4 I/O Controller Module 9–24
A. Sun StorEdge 3510 and 3511 FC Array Specifications A–1
A.1 Physical Specifications A–2
A.2 Sun StorEdge 3510 and 3511 FC Array Highlights A–3
A.3 Agency Approvals and Standards A–5
B. Using a Standalone JBOD Array (Sun StorEdge 3510 FC Array Only) B–1
B.1 Supported Configurations (JBOD Arrays) B–2
B.2 Supported Operating Systems (JBOD Arrays) B–2
To Next Page
Loading...
Need help?
General
