Sunfar C300 Series - Analog I;O Parameters: Frequency Input Settings

SUNFAR C300 25
C300 series of non-sensor current vector-control inverter manual
Parameters’
Types
Function Code Name Setting range
Minimum
Setting
Manufacture
Setting
Modify
Limit
F2.7
External freq. set time
constant offiltering
0.01～1.00Sec 0.01 0.10
F2.8 Combination setting mode Refer to the explanations about（0～19） 1 0
F2.9
Analog output selection
（AVO）
The first part of LED (form right to left)：
AO1output
0：Output freq.
1：Output current
2：Output voltage
3：Rotational speed Of applied motor
4：PID setting
5：PID feedback
The second and third and fourth part of
LED：Reserved
1 0000
F2.10
The lower limit of analog
output AVO
0.0～[F2.11] 0.1 0.0 V
F2.11
The upper limit of analog
output AVO
[F2.10]～12.0 0.1 10.0V
Analog I/O parameter unit
F2.12 Reserved
--
-- --
--
-- -- --