SINGLE PHASE HI 10/12kW | User Manual2
SAFETY 3
General Safety 3
Symbols/Safety Signs 3
Safety Instructions 5
Product Disposal 5
PRODUCT INTRODUCTION 6
Product Overview 6
Product Size 7
Product Features 8
Basic System Architecture 9
TECHNICAL SPECIFICATIONS 10
INSTALLATION 12
Parts List 12
Selecting the Mounting Area 13
Mounting the Inverter 14
Battery Connection 15
Function Port Denition 17
Lead-Acid Battery Temperature Sensor 18
Connecting the AC 19
Recommended AC Surge Protector 20
PV Connection 21
PV Module Selection 21
PV Module Wiring 21
PV Protection 22
Installing the CT Coil 22
Meter Connection 24
System Connection for the CHNT Meter 24
Earth Connection (MANDATORY) 24
Wiring System for Inverter 26
Typical Application of Diesel Generator 27
Single-Phase Parallel Connection 28
Three-Phase Parallel Inverter 30
OPERATION 32
Switching ON/OFF 32
Display 32
LED Indicators 32
Function Buttons 32
LCD Operation Flow Chart 33
Home Page 34
Status Page 34
System Flow Page 35
Setup Page 36
Basic Setup 37
Set Time (Clock) 37
Set Company Name / Beeper / Auto dim 37
Factory Reset and Lock Code 38
Inverter Remote Control 39
Battery Setup Page 39
Generator & Battery Page 40
Battery Discharge Page 42
Setting Up a Lithium Battery 44
Program Charge & Discharge Times 50
Grid Supply Page 54
Paralleling Inverters Advanced Settings 58
Connecting the DRM’s 61
Advanced Function Setup 62
Solar Power Generated 62
Grid Power 63
Advanced Settings for Wind Turbines 64
Advanced Settings for Auxiliary Load 65
OPERATION MODES 68
Mode I: Basic 68
Mode II: Generator 68
Mode III: With Aux-Load 69
Mode IV: AC Couple 69
FAULT CODES 71
COMMISSIONING 75
Start-Up / Shutdown Procedure 75
Inverter Commissioning Info 75
GDFI Fault 76
MAINTENANCE 76
APPENDIX A 77
APPENDIX B 78
APPENDIX C 78
APPENDIX D 78
APPENDIX E 78
Table of Contents
To Next Page
Loading...
Need help?
General