SUNWARD SWE90UF-2PB - Wearing Parts; Maintenance under Special Situation

SWE90UF-2PB Operation & Maintenance Manual
115
5.4.12 Wearing Parts
Items
Product no.
Parts name
Engine oil filter
730403000123
Engine oil filter element
Fuel filter
730403000459
Oil-water separator filter
element
730403000535
Diesel filter element
Hydraulic oil filter
element
730403000028
Suction filter element
730403010028
Oil return filter element
730402000229
Air filter
Pilot filter
730403000058
Pilot filter element
Air filter element
730402010011
Outer filter element of air
filter
730402010012
Safety filter element of air
filter
Bucket
750601000013
Horizontal bucket teeth
750601000015
Horizontal pin
750601000016
Side teeth
701104014021
Bolt
701406014001
Nut
5.4.13 Maintenance under Special Situation
Work condition
Maintenance instruction
In mud, water and rain.
 Check joint, bolt and nut for looseness and lost, and any signs
of damages and leakage.
 After work, clean up mud, rock, sand adhered to machine.
Check welds for damages, cracks and looseness.
 Execute daily lubrication and maintenance work.
 In the event that machine has to work in circumstances
involving acid rain or corrosive stuff, flush parts being
effected with clean water.
On the sea
 Check plug and all drain plug to ensure they are tighten
securely prior to operation.
 After completing operation, flush machine with fresh water to
remove salt. Carry out maintenance operation regularly to