SUNWARD SWE90UF-2PB - Optional Parts List

SWE90UF-2PB Operation & Maintenance Manual
172
3. Switch function of left and right handle
This function is to change the control function on the left and right handle. Normally, the
changeover valve is on the
Ⅰ
position, at this moment, it’s the left handle to control the arm and the
right handle to control the boom. When the changeover valve is on the Ⅱ position, at this moment, it’s
the left handle to control the boom and the right handle to control the arm.
7.7 OPTIONAL PARTS LIST
Arm
Length of arm
Standard arm
2100mm
Optional short arm
1680mm
Bucket
Rated capacity
Cutting width
Standard bucket
0.26m³
680mm
Option bucket (desilting
bucket）
-----
1500mm
Quick-change device
Option quick-change device
1
Finland quick-change
Equipped with special bucket
Option quick-change device
2
Italy quick-change
Option quick-change device
3
Hydraulic quick-change