Chapter 3: Maintenance and Component Installation
Installation Overview
the processor carrier assembly. This will be attached to the heatsink to form the processor
Notes:
•
• The sytem power cords must be removed from all power supplies.
• Check that the plastic protective cover is on the CPU socket and none of the socket pins
are bent. If they are, contact your retailer.
•
(gold contacts). Improper installation or socket misalignment can cause serious damage
to the processor or socket, which may require manufacturer repairs.
• Refer to the Supermicro website for updates on processor support.
Installation Procedure Overview
the processor and heatsink onto the motherboard.
1. Attach the processor to a plastic carrier to create the processor carrier assembly.
Attach the processor carrier assembly to the heatsink to create the processor heatsink
Remove the socket cover.
4.
To Next Page
Loading...
Need help?
General
