Supermicro SuperWorkstation SYS-751A-I - Power Connections


Chapter 4: Motherboard Connections
4.2 Power Connections
ATX Power Supply Connector (JPWR1)

           
supply to provide adequate power to your system.
Important: To provide adequate power to the motherboard, connect all power connectors
to the power supply. Failure to do so may void the manufacturer's warranty on your power
supply and motherboard.
12V 8-pin Power
Pin Denitions
Pin# Denition
1 - 4 
5 - 8 
Required Connection
Required Connection
ATX Power 24-pin Connector
Pin Denitions
Pin# Denition Pin# Denition
  1 
14 NC  
15   
16 PS_ON 4 +5V
17  5 
18  6 +5V
  7 
 Res (NC) 8 
 +5V  
 +5V 10 
 +5V 11 
   
ATX Power Supply Connector (JPWR2/JPWR3/JPWR4)

power supply to provide adequate power to your system.
12V 8-pin Power
Pin Denitions
Pin# Denition
1 - 4 
5 - 8 
Required Connection
Universal Serial Bus (USB)

LAN Ports (LAN1/LAN2)

          
Section 4.5