Supero X10SLV User Manual

Chapter 2: Installation
2-7
Warning: You can only install the CPU inside the socket only in one direction. Make
sure that it is properly inserted into the CPU socket before closing the load plate. If it
doesn't close properly, do not force it as it may damage your CPU. Instead, open the
load plate again and double-check that the CPU is aligned properly.
5. Once the CPU is properly installed, use your thumb to gently push the load
plate handle down to the handle lock and lock it.
6. When the CPU is securely locked into the CPU socket, the plastic cap will be
automatically loosened from the load plate. Use your thumb and index nger
to remove the plastic cap from the socket.
CPU properly
installed
Load Plate Handle
is locked into place
The plastic cap will
pop open when the
CPU is properly
installed in the
socket. Remove the
cap from the socket.

Supero X10SLV Specifications

General

Brand	Supero
Model	X10SLV
Category	Motherboard
Language	English