Appendix A: POST Error Beep Codes
A-1
Appendix A
POST Error Beep Codes
This section lists POST (Power On Self Test) error beep codes for the AMI BIOS.
POST error beep codes are divided into two categories: recoverable and terminal.
This section lists Beep Codes for recoverable POST errors.
Recoverable POST Error Beep Codes
When a recoverable type of error occurs during POST, BIOS will display a POST
code that describes the problem. BIOS may also issue one of the following beep
codes:
1 beep - circuits have been reset (ready to power up).
5 short beeps + 1 long beep - No memory detected in the system
1 continuous beep with the front panel Overheat LED on - system overheat
5 short beeps - system display error
To Next Page
Loading...
