To Next Page

To Previous Page

Chapter 4: AMI BIOS

4-23

(IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12) and (IO=2E8h; IRQ=3, 4, 5, 6,

7, 10, 11, 12).

The options for Serial Port 3 are Auto, (IO=3E8h; IRQ=5), (IO=3E8h;

IRQ=3, 4, 5, 6, 7, 10, 11, 12), (IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12),

(IO=2E0h; IRQ=3, 4, 5, 6, 7, 10, 11, 12) and (IO=2F0h; IRQ=3, 4, 5, 6,

7, 10, 11, 12).

The options for Serial Port 4 are Auto, (IO=2E8h; IRQ=6), (IO=3E8h;

IRQ=3, 4, 5, 6, 7, 10, 11, 12), (IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12),

(IO=2E0h; IRQ=3, 4, 5, 6, 7, 10, 11, 12) and (IO=2F0h; IRQ=3, 4, 5, 6,

7, 10, 11, 12).

The options for Serial Port 5 are Auto, (IO=2F0h; IRQ=7), (IO=3E8h;

IRQ=3, 4, 5, 6, 7, 10, 11, 12), (IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12),

(IO=2E0h; IRQ=3, 4, 5, 6, 7, 10, 11, 12) and (IO=2F0h; IRQ=3, 4, 5, 6,

7, 10, 11, 12).

Transmit Mode (Serial Port 5)

This option changes the transmit mode of Serial Port 5. The options are

RS232 Mode, RS485 Mode and RS422 Mode.



NCT6106D H/W (Hardware) Monitor

PC Health Status

Fan Speed Control Mode

This feature allows the user to decide how the system controls the speeds of the

onboard fans. The CPU temperature and the fan speed are correlative. When the

CPU on-die temperature increases, the fan speed will also increase for effective

system cooling. Select "Full Speed" to allow the onboard fans to run at full speed

(of 100% Pulse Width Modulation Duty Cycle) for maximum cooling. This setting

is recommended for special system conguration or debugging. Select "Standard"

for the onboard fans to run at 50% of the Initial PWM Cycle in order to balance the

needs between system cooling and power saving. This setting is recommended for

regular systems with normal hardware congurations. The options are Full Speed

(@100% of PWM Cycle), and Standard (@50% of PWM Cycle).

The following items will be displayed:

•Peripheral Temperature

•System Temperature

•CPU Temperature (PECI)

Supero X10SLV User Manual

Questions and Answers: