4-8
X10SLV/-Q Motherboard User’s Manual
Adjacent Cache Line Prefetch (Available when supported by the CPU)
Select Enabled for the CPU to prefetch both cache lines for 128 bytes as comprised.
Select Disabled for the CPU to prefetch both cache lines for 64 bytes. The options
are Disabled and Enabled.
Note: If there is any change to this setting, you will need to power off and
reboot the system for the change to take effect. Please refer to Intel’s
web site for detailed information.
CPU AES
Select Enable for Intel CPU Advanced Encryption Standard (AES) Instructions sup-
port to enhance data integrity. The options are Enabled and Disabled.
Boot Performance Mode
This feature selects the performance state the BIOS will set before the OS hand-off.
The options are Max Non-Turbo Performance and Turbo Performance:
EIST
EIST (Enhanced Intel SpeedStep Technology) allows the system to automatically
adjust processor voltage and core frequency in an effort to reduce power consump-
tion and heat dissipation. Please refer to Intel’s web site for detailed informa-
tion. The options are Disabled and Enabled. The following options will appear if
EIST is enabled:
Turbo Mode
This feature allows processor cores to run faster than the frequency recommended
by the manufacturer. The options are Disabled and Enabled. If this feature is set
to Enabled, the following items will display:
CPU Power Limit1
Use this feature to set the power limit for CPU1. Use the number keys on your
keyboard to enter the value. Enter 0 to use the manufacturer's default setting.
CPU Power Limit1 Time
This item allows the user to determine how long CPU1 should operate at the
power limit set by the user for the item above. Use the number keys on your
keyboard to enter the value. Enter 0 to use the manufacturer's default setting.
CPU Power Limit2
Use this feature to set the power limit for CPU2. Use the number keys on your
keyboard to enter the value. Enter 0 to use the manufacturer's default setting.
To Next Page
Loading...
Need help?
General
