103
(8) Then following window appears.
This window is used to register the engine configuration.
Select the number of engines and the position of engines by clicking the “ ” button, then click the “OK”
button and proceed to the next step.
(Keyboard operation) Move to a desired item by using the “Tab” key. Select a desired item by using the
“Up” or “Down” arrow key and pressing the “Enter” key.
Click the “Cancel” button to cancel the engine configuration.
(9) Click the “OK” button (or “Enter” key on the keyboard) if the registration is correct.
Clicking the “Cancel” button returns to the previous screen.
To Next Page
Loading...
