119
Propeller installation
Front propeller:
(1) Coat both the propeller shaft splines liberally with Suzuki
water resistant grease.
: 99000-25350: SUZUKI Water Resistant
Grease EP2 (250 g)
(2) Install front propeller stopper (1) onto propeller shaft, then
slide on the front propeller (2).
(3) Fit the propeller nut stopper (4) to front propeller nut spacer
(3), then install them to propeller shaft.
NOTE:
The circular tab “A” of propeller nut stopper must be placed in
the groove with a circle mark as shown in illustration.
1
2
3
5
4
(a)
“A”
3
4
Circle mark
To Next Page
Loading...
