75
SETTING CHANGE
Change or reset the remote control lever characteristics and full
tilt down position.
NOTE:
Change system settings when disassembling or replacing the
remote control lever, its related parts, or tilt-related parts.
Lever Characteristics
(1) Clicking the “SETTING CHANGE” button from
the Main Menu dialog box displays the follow-
ing window of boat station configuration regis-
tered in the BCM during system calibration.
*
Figure is the “SETTING CHANGE” initial win-
dow registered as the single station.
*
Figure is the “SETTING CHANGE” initial win-
dow registered as the dual station.
To Next Page
Loading...
