©
Note:
.Repeat setting (except "ALL")will be cleared when moving to
another dtle, chapter or track.
*During programmed playback for audio CD,repeat setdng
will be effective for the tracks in the program.
*Repeat playback or repeat A-B playback may not available
with some discs.
*RepeatA-B playback doesnot function during other repeat
mode.
* Tocancelpoint A, press[CLEAR] at step 2in "Repeat A-B
Playback".
*Stopping playback will cancel repeat A-Bplayback.
21 Use [Cursor A / V] to select a desired track, then press ....
[ENTER] to store.
• Additional tracks may be on other screens. Use
[Curso¢A/T] to goonto thenext/ previouspages.
. Repeat this step until you have selected all the tracks
you wish to play back in the program.
[] Random Playback
Thisfunction shufflesthe playing orderoftracks insteadof playbackinthe
sequence.
_ In stop mode, press [MODE] repeatedly until
"RANDOM" menu appears.
MODE
2 Press [PLAY I_] to start random playback.
Note: ]
* Torepeat the current track in the random mode, follow the I
steps I and 2 in "RepeatPlayback" on page 26 and select |
"[---;TRACK': I
. Torepeat the entire random selections,follow the steps 1and|
2 in "RepeatPlayback" on page 26 and select" ALL': I
.Random playback will bekept untilyou press[STOPm]. J
[] Programmed Playback
Youmaydeterminethe orderinwhichtrackswillbe play hack.
In stop mode, press [MODE] repeatedly until the
"PROGRAM" menu appears.
MODE
• Up to 99 tracks can be ordered.
. If8 or more tracks were in a program, use
[SKIPI_!_ / IH_I] to see all the tracks.
_ Press [PLAYI_] to start programmed playback.
Note:
• Press[CLEAR]to erase the last track in the program if you
make on error.
• Toerase all programmed tracks at once, select "ALLCLEAR"
and press[ENTER]at step2.
• While o program isbeingplayed back,[STOPm] works as
follows:
- Pressing[STOPm] once:Thetrack will be in the resume
standby mode. Next time you press[PLAYl_[, the playback
wlll resumefrom thepoint whereit isstopped in the
programmed playback.
- Pressing[STOPI] twice: Resumemode will becanceled.
Next time you press[PLAYI_], playback will restart from the
first track in the original order. However, your programmed
playback can berestarted when you follow the above steps.
(Yourprograms are still stored until either the disc is ejected
or the unit is turned off.)
- On some discs,[STOP m] will not work while the resume
messageappears. Please wait until the message disappears.
. Torepeat the current track in the program, follow the steps 1
and 2 in "RepeatPlayback" on page 26 and select
"_- ]TRACK".
. Torepeat the entire program, follow the steps 1 and 2 in
"RepeatPlayback" on page 26 and select "l :_lALL'_
. Turning offthe unit or opening the disc tray will erase the
program.
. Youcannot use[the Number buttons] to select another
track during programmed playback. Use[REV _] or
[FWO _1_] to select other tracks in the program.
• Youcannot combine random playback with programmed
playback.
• Youcannot alter o programmed order during playback.
• Youcan startprogrornrned playback only while in
"PROGRAM"menu.
_o_
iiii
i ii_iii!!;
i'<_il
i i:!i
EN
To Next Page
Loading...
