SYSMEX SP-50 - On-board Reagents for SP-50

Analyser components – Reagents On-board the SP-50
Sysmex House, Garamonde Drive, Wymbush, Milton Keynes, MK8 8DF, United Kingdom · Phone +44 333 320 3460 · Fax +44 1908 267 901
academy.training@sysmex.co.uk· www.sysmex.co.uk
11
Reagents On-board the SP-50
The number of on-board reagents on the SP-50 depends on the staining protocol used. The table below
summarises the reagents recommended for use on the SP-series.
*See product insert and/or container for specific data.
Reagent Name
Function
On-board Stability
Cell Pack DCL
Rinse solution used for rinsing the whole blood
aspiration line.
60 days
May-Grunwald stain
Used for staining blood smears.
N/A*
Giemsa stain
Used for staining blood smears.
N/A*
Buffer solution pH 7.0
Used in the preparation of blood smears.
N/A*
Methanol
Used in staining process depending on protocol
and during maintenance procedures.
N/A*
CellClean
Alkaline detergent used for internal cleaning of the
SP-50
60 days