Analyser components – SP-50 Overview
Sysmex House, Garamonde Drive, Wymbush, Milton Keynes, MK8 8DF, United Kingdom · Phone +44 333 320 3460 · Fax +44 1908 267 901
academy.training@sysmex.co.uk· www.sysmex.co.uk
13. Slide Unit Cover - Open to load glass slides. Locked during operation.
14. Smear Unit Cover - Open this cover to inspect the interior of the smear unit to perform cleaning
or maintenance tasks. The smear unit cover and the slide set cover are one piece. To open the
smear unit cover, remove the slide supply cassette first. Locked during operation
Front Components
1. 0.07 MPa Regulator – Regulates the source pressure to 0.07 MPa
2. Main Power Switch – Press to turn the main power of the main unit on/off
3. Slide Supply Cassette Status LED – Shows the current status of the supply cassettes. A
cassette cannot be loaded or removed while the LED is flashing.
4. Printer – Prints sample information and patient demographics onto glass slide.
5. Slide Supply Cassettes – Loads/stores glass slides for use on the SP-50.
To Next Page
Loading...
