As Required Maintenance – Quick Guide: Maintenance
Sysmex House, Garamonde Drive, Wymbush, Milton Keynes, MK8 8DF, United Kingdom · Phone +44 333 320 3460 · Fax +44 1908 267 901
academy.training@sysmex.co.uk· www.sysmex.co.uk
As Required Maintenance
Loading Glass Slides
To load the glass slides:
1. Open the slide unit cover and remove the slide supply cassettes. Before removing, make sure
that the slide cassette status LED is either Green or red.
2. Remove the slide supply cassette guide and load in the new slides. Load the glass slides so that
the frosted end faces upwards and is positioned toward the ‘guide end’ of the cassette, opposite
end to the handle.
3. Replace the slide supply cassette guide, load the slide cassettes back into the slide supply unit
and close the slide unit cover.
To Next Page
Loading...
