SYSMEX SP-50 - Performing Start-Up

Daily Maintenance – Quick Guide: Maintenance
Sysmex House, Garamonde Drive, Wymbush, Milton Keynes, MK8 8DF, United Kingdom · Phone +44 333 320 3460 · Fax +44 1908 267 901
academy.training@sysmex.co.uk· www.sysmex.co.uk
22
Performing Start-up
Before stating up the SP-50 check that all consumables are replenished.
To perform start-up:
1. Make sure the main power switch is turned ON. If required, the main power switch can be kept
on at all times.
2. Press the start-up power switch to start up the instrument.