Daily Maintenance – Quick Guide: Maintenance
Sysmex House, Garamonde Drive, Wymbush, Milton Keynes, MK8 8DF, United Kingdom · Phone +44 333 320 3460 · Fax +44 1908 267 901
academy.training@sysmex.co.uk· www.sysmex.co.uk
3. The [IPU logon] dialog box will appear. Select the name of the user by touching the name on the
screen. An onboard keyboard appears, enter the required password. Ordinarily the username is
‘admin’ and the password is ‘admin’.
4. Once logged on the analyser will perform a self-check. This is to determine if there are any errors
on the analyser. The self-check takes approximately 20 minutes and performs the following
tasks:
• Initialisation of the mechanical units.
• Rinsing of the hydraulic unit.
• Replenishment of the reagents.
5. Once the self-check is complete the analyser will be ready for use.
To Next Page
Loading...
