TA Instruments DSC Autosampler CE User Manual

TA I NSTRUMENTS DSC A UTOSAMPLER CE 4–33
Step B:
Use the LIDS key to test the Autosampler
CEs ability to cover the DSC cell.
1. Press RESET SAMPLER and ENTER to
bring the Autosampler CE to home position.
2. Press the LIDS key. The Autosampler CE
screen displays:
Uncover (1) or
Cover (2) ? 1
3. Select option 2 (Cover) by pressing the 2
key, then pressing ENTER. The Autosam-
pler CE removes all lids from their storage
positions and places them on the cell.
4. Press the LIDS key again. The screen
displays:
Uncover (1) or
Cover (2) ? 1
5. Select default option 1 (Uncover) by press-
ing ENTER. The Autosampler CE removes
all lids from the cell and returns them to their
storage positions.
When you have finished using the Autosampler
CE keypad, remember to close the keypad cover
and finger-tighten the thumbscrews before
starting a method.
Checking Your Calibration
NOTE:

TA Instruments DSC Autosampler CE Specifications

General

Brand	TA Instruments
Model	DSC Autosampler CE
Category	Laboratory Equipment
Language	English