TA Instruments DSC Autosampler CE User Manual

TA I NSTRUMENTS DSC A UTOSAMPLER CExii
Autosampler CE
Safety Labels
NEVER touch the surface of the metal exterior can
covering the DSC cell when the Autosampler CE is
operating. It can become very hot.
NEVER open the Autosampler CE rear electronics
cabinet. Its contents should be serviced by authorized
service personnel only. No user-serviceable parts are
contained within the electronics enclosure, and
hazardous voltages are present within.
NEVER put your fingers in the Autosampler CEs
path when the turret assembly is moving. The gripper
fingers are made of fine wire and could scratch or
pierce your skin.
Operation Safety
 ALWAYS handle the DSC cell lids and
sample pans with tweezers; they can
become very hot.
 ALWAYS keep your compressed air hoses
securely fastened to the lab bench (e.g., use
clamps or tape). Sudden increases in pres-
sure can cause them to fly off the counter.

TA Instruments DSC Autosampler CE Specifications

General

Brand	TA Instruments
Model	DSC Autosampler CE
Category	Laboratory Equipment
Language	English