TA I
NSTRUMENTS
DSC A
UTOSAMPLER
CE xiii
NEVER leave flammable items (e.g., liquids,
paper) around the Autosampler CE work
area, especially during unattended
runs. If a hot lid or pan were dropped
accidentally, a fire hazard could be created.
Never open the DSC cell when it is at a
temperature of 200
o
C or higher; doing so
can cause the cell to oxidize.
NEVER store hot lids (>100
o
C) on the
Autosampler CE console cover.
NEVER try to move the turret assembly by
pushing it with your hand. Doing so could
cause mechanical damage and calibration
errors.
NEVER slide the Autosampler CE console
to the right while the instrument is in use.
Review the safety notes in your instrument
Operators Manual.
Review the safety notes in the LNCA
Operators Manual or RCS addendum, if
that option is installed.
Lifting the Instrument
The TGA 2950 CE is a fairly heavy instrument.
In order to avoid injury, particularly to the back,
please follow this advice:
Use two people to lift and/or carry the
instrument. The instrument is too heavy for
one person to handle safely.
!
WARNING